Trouble with Input Signal
-
Hi Folks,
Thanks in advance for your help.
I have a UA Apollo 8P and also an AxeFxIII.I am using the BIAS Pedal Standalone app. I have tried both interfaces as input devices. I get a signal but it's 50% wet and 50% dry. I cannot seem to eliminate the dry signal from either input medium. Can anyone please help?
Also I cannot seem to get the operating window any larger than it starts, which is very small making it very hard to read the controls.
Thanks very much. Sorry. New to this interface and cannot immediately find anything on the topic.
Kindly,
Vic Wilder
RedCircle Guitars -
I am having the same issue. I cannot get rid of the dry signal. Even if I turn the computer's volume (using my Behringer UMC404 as an output) all the way down, I still get the dry signal. It makes me think it's the interface & not BIAS FX 2.
-
@info-8 There's usually some direct-monitoring function on those interfaces. You need to find it and mute it.
-
The Apollo is pretty advanced as is the AXEFX III. I'm stumped. I will look on the Axe Forums
-
Nothing from the guys on the AxeFX Forum or Apollo / UA.
PG can you help?
-
@vic-wilder I replied in your other thread here.
