Spark not working
-
My spark arrived this pm. Updated software, plugged in and nothing. Guitar works on another amp but not the Spark
Help !
-
@n-mcandrew Yep same thing happened for me just now. used it out of the box from and was great as amp and bluetooth audio, went to use the app which requested firmware update and from then no audio out . Lodged a support ticket
-
Same here, Spark Pearl arrived today, first thing I did was to update the firmware but I get no sound at all whatever I do (tested with a bass, a guitar, 2 cables, reupdated the firmware multiple times also with 2 different cables - on Windows 10).
Mine doesn't even output any sound as a bluetooth speaker.Support ticket created.
-
Ok so it's now "working" after I reverted from 1.5.4.102 to 1.2.3.37 (I believe that was the version my unit shipped with) using the link in this reply: https://forum.positivegrid.com/topic/6148/spark-not-working-after-firmware-upgrade/23?_=1638374866872
It's now working correctly as a speaker and also as a proper amp although it doesn't work with my Line6 Relay G10 wireless system, so I will have to put up with a cable for now.
-
Had the same thing happen to me. Unfortunately, even after the Firmware Update with Logging completed (snippet of the logs below), it still wont work. Currently pending feedback from their support team.
Found MIDI IN device:Spark 40
Start this MIDI input device
Found MIDI OUT device:Microsoft GS Wavetable Synth
Found MIDI OUT device:Spark 40
This MIDI Out device is available
1 device(s) found
Get device SN:'xxxxxxxxxĂ·'
Get FW SID: 0
Get FW Status: 1
Set FW Status as 0
Will sleep for 0 ms
Sending GetFwInfo command
Sent GetFwInfo command
Got FW Info:
Device Name: G1JU
Bootloader Version: 0.5.0.47
FW Version: 1.5.4.102
FW Length: 184709
Checksum: 1170071632
Sector len: 4096 & checksum: 1189931376
Sector len: 4096 & checksum: -171769472
Sector len: 16384 & checksum: 963562185
Sector len: 32768 & checksum: -1317357461
Sector len: 32768 & checksum: -2131854617
Sector len: 32768 & checksum: -1702055396
Sector len: 32768 & checksum: 0
Updating: 0%
Updating: 0%
.
.
.
Updating: 99%
Updating: 99%
Updating: 99%
Updating: 100%
Firmware upgraded! -
@cjouineau Can you check the firmware version again that it is indeed 1.2.xx.. I did the same logging update yesterday but it was still 1.5xx . or does that mean the firmware update didnt work. I assume you're again unable to use the app as the app requires 1.5.
Elsewhere in these posts someone has written that running the 1.2 firmware update got it working again but i dont have access to that firmware version anywhere
-
@nck-chrst I confirm it is back to 1.2.3.37, even if I check using the latest updater. And the app (Android) does work.