Static
-
I’ve had my Spark about a week now. Used it successfully twice.
Today I got it all set up and connected to Bluetooth.
Found a backing track to play along with.
Audio for backing track was coming out of the amp as it should.
No guitar signal. Only static. Tried other presets and just static.
I reinstalled the app. Static.
I did a factory reset on the Spark.
Same static.
Not sure what’s going on.
Worked fine before but I’m getting no guitar through presets or by controls on the amp on my end.
Guitar and cable are fine as they work on another unit. Tuner is not on.
Any help is appreciated. Thanks -
@sopb9lives it's always a good idea to try a different guitar and cable straight into the amp if you have one. Also try turning the noise gate off or way down. If the guitar output is low, the gate could prevent the signal from coming through.
-
had the same problem but it happened twice they sent me a different amp and it did the same thing a week later