Jam tracks not playing through Spark amp
-
I have just received my Spark amp and am enjoying getting to grips with it. Two idiot questions! 1. How do I get the backing tracks to play through the amp? They are only playing through the tiny speakers in my tablet. 2. How do I cancel the various effects I have selected and revert to a “clean” signal? There's probably a simple solution but I haven't found it yet!
-
Check the Bluetooth settings on your tablet;
Make sure you have paired Spark 40 Audio, as well as Spark 40 BLE. -
@petergrahamsmith
1 - you should set the amplifier, as well as bt receiver, also as an audio transmitter in the Tablet settings
2 - reselect a clean preset -
Make sure you have the little knob on the back right side of the amp turned on rotate to the right
-
I had the same problem, twice. Once because I also had both phone and tablet connected by BT. Only connect one at a time. Second, if you connect a computer via USB it will disable BT playback. So need to disconnect USB if want to play music from tablet through Spark speakers.