Bias fx2 midi and meloaudio midi commander
I tried it today, and the meloaudio is not recognized by bias fx2.
This is works fine with bias fx1.
Any idea what cloud be the problem?
Korkenknopfus last edited by
@esofron oh, no, I haven’t tested until now, I wanted to try at weekend. Now I am worried, as I have the same controller and it works with BFX1.
@korkenknopfus please test it and tell if you find anything.
bruce 1 last edited by
I don't think MIDI control is working at all. I have an FCB-1010 and no commands are recieved - not even cc27. All my other IOS apps work fine and Midi Wrench also confirms that the pedal is working.
twickl last edited by
It also won‘t work with iRig Stomp IO which works flawlessly with Bias FX 1 Mobile. I don‘t think MIDI is implemented at all in a working state.
Adam White last edited by
Like you all found fx1 works fine, FX2 with control change but no program change,
I’m at work now and see there is an update to correct this... keeping my fingers crossed they corrected this.
thierryfournier1964 last edited by
Does it work with the new update? thank you
bruce 1 last edited by
Yes it seems to be fine now...thanks PG!
Korkenknopfus last edited by Korkenknopfus
Hello: I think it works with the last update (from today) although I must still learn a couple of things, as it works different as with BFX1.
First, I noted that it jumps to the right bank even if you are away from it. In BFX1, if I am for example in bank group 0-3 but in Commander is selected group 4-7, nothing happens if I switch patch, but in BFX2 it switches to group 4-7 and activates the selected patch.
If I assign power toggle to a delay, for example, I can’t see this no more in the button in Liveview, so I must remember what effect is controlled. But I can set up a scene to this button, where this delay can be toggled. In this case I must reset the toggle that I programmed individually in this delay, to avoid conflict.
In Liveview now it happens nothing if I touch a pedal. To assign midi to an individual pedal I must go to stomp view. I don’t know if this is intended.
In BX1 there were a lot of assigned pedals as default. Now one must set up this again. But maybe with scenes should this be easier.
This post is deleted!
@esofron Positive Grid make their own hardware controllers.
I think this is why they refuse to address the lack of support for Meloaudio.
Meloaudio showed support for Positive Grid by including patches for Bias FX, but Positive Grid did not show support to Meloaudio by continuing the already built in support from the device.
I bought two Midi Commanders. I have tried alt firm ware in one of them, nothing. And all you get from Positive Grid "Support" is: "It's supported" and send basic midi general education information.
Love the software, but I have given up hope of them supporting the Midi Commander.
I bet the same can be said for any brand that is direct competition to Positive Grid's hardware line.
To see how long this problem has been around is the final nail in the coffin. I give up on them..
rlyd987 last edited by
I am also facing the same problem and I want to know how can I solve this issue and gladly I have found your post in which I have found my question answer. Thank you so much for sharing this information with us. These days, getting good marks on your essay assignments is really hard and because of this, I used to search for an essay writing service online with reviews which take a lot of time. But this time, I have found the https://edubirdie.net/blog/edubirdie-review link and now I don't need to find reviews on different websites.
@esofron The problem was with the BIAS FX2 Software. With the last two updates, they fixed some MIDI problem. Now the MIDI Commander is recognized. I am programming patches as I type this.
It was the version before last that fixed the issue. I am currently running the new 22.214.171.12400 Release from today..
@gary_hutchings thanks for the info. I will try it.