Amp Spark Plug issues - can´t plug the power cable into the amp
-
Hello,
I received my amp today. It looks great but I can´t plug the power cable into my amp. It´s my first amp - is there any trick to plug it in? I allready used my strenght but it won´t fit in. -
Some pictures would help from the hole power supply and from the front of the plug into the amp. How many mm has this plug on the outside and inside? Is there a plug in the middle of the plug?
-
Hey, thank you for your help. Here are some pictures. Its the original cable from the spark amp. There is a safety system i guess but normally with strenght it should go in. I am not the weakest and i allready tried it with my full power to plug it in.
-
Wenn das innere Loch des Steckers 2,5mm Durchmesser hat müsste der Plug da eigentlich leicht rein zu stecken gehen. Pass halt auf, dass sich der Stift in der Mitte der Buchse nicht verbiegt. Das sieht für mich aus, wie es auszusehen hat.
Nicht mit Gewalt, der Stecker sitzt eher locker.
Ist evtl. Schon eine der Klammern im Stecker verbogen oder der Stift in der Buchse?! -
Also der Stecker passt zu 2/3 rein, aber er sitzt dann sehr locker - also wirklich sehr locker. Ich glaube nicht, dass das gewollt ist von positive grid. Jedoch ist das mein erster amp, weswegen ich leider noch keine Erfahrungen habe. Ich schicke noch einmal ein Foto, wo man sieht, wie weit er drin steckt. Ich kenne das nur von anderen Geräten, dass das power cable normal (fest) drinnen sitzt und nichts wackelt.
-
@leon-schoenekerl said in Amp Spark Plug issues - can´t plug the power cable into the amp:
Also der Stecker passt zu 2/3 rein, aber er sitzt dann sehr locker - also wirklich sehr locker. Ich glaube nicht, dass das gewollt ist von positive grid. Jedoch ist das mein erster amp, weswegen ich leider noch keine Erfahrungen habe. Ich schicke noch einmal ein Foto, wo man sieht, wie weit er drin steckt. Ich kenne das nur von anderen Geräten, dass das power cable normal (fest) drinnen sitzt und nichts wackelt.
That's about how far mine inserts. Yes I can jiggle it a little. You are getting no power? Have you checked the plug with a voltmeter?
-
Thanks for your help,
yes i get power but do you really think that this is wanted by positive grid or is this with every amp that the cable is so wobbly. I will leave it like this for now. Allready sent a support ticket so maybe they know more. Also I don´t wan´t to break anything.
-
@leon-schoenekerl That is exactly how mine looks. The internal contact in the jack on the Spark that contacts the outside ‘barrel’ of the plug is spring loaded and puts a little pressure on the plug to make contact. When either inserting or removing the plug from the jack I feel a slight resistance and thats intended and due to that spring contact. Yes mine wiggles around too, but no issue as it has always worked and made contact, and I’ve had the Spark since 20-April and use it several times a week and always remove the plug at each use to put it back in the bag (in other words, I don’t leave the Spark just sitting on a desk plugged in all the time). So again, no issues in 13 weeks probably plugging it in and out 60 times since I’ve had it.
-
@bschultz8 ok then i am reassured, thank you!
-
Das ist so ok, wie es ist.
Wenn der Amp brummt brauchst du sowieso ein geerdetes Netzteil.
Das sitzt dann aber auch nicht fester. -
@leon-schoenekerl
Ich bin froh, dass du dich beruhigt fühlst. Ich habe ein neues geerdetes Netzteil. Lassen Sie Sie wissen, wie das funktioniert.BTW, mein Deutsch ist scheiße, also habe ich betrogen und einen Online-Übersetzer benutzt !! :-)