Using Bias Amp/FX through Yamaha THR help please!
-
Ok ladies and gents. Need some help..
Running Bias amp to my THR from PC via USB. Keeping the THR on the clean channel but nothing from the Amp sim comes through to the THR. When i check setting all looks like it should i think.
https://www.dropbox.com/s/adtp3z6fynrwmpu/screenshot 2020-03-11 13.51.20.png?dl=0
Any idea what it could be?
-
@diegofiorillo-uk Try adjusting your THR volume and Aux/USB volume settings (the 2 knobs on the far right). The volume should be low, the Aux/USB high. Also, I would suggest you use the Flat amp setting on the THR since you are using the amps from Bias.
-
@johndagostino said in Using Bias Amp/FX through Yamaha THR help please!:
@diegofiorillo-uk Try adjusting your THR volume and Aux/USB volume settings (the 2 knobs on the far right). The volume should be low, the Aux/USB high. Also, I would suggest you use the Flat amp setting on the THR since you are using the amps from Bias.
Yep, thanks...got it. Should hold me over until my spark arrives. Thanks again!
-
It doesn’t matter which THR Amp setting your on. Just make sure you are using the Left and Right Stereo DI for your input. Make sure “Guitar” volume knob is zero. Otherwise you will be getting THR amp signal which you don’t want when you are running Bias or any other modelling sim. I also Max the USB volume knob on the THR to get the fullest Bias tone. I control volume in Bias. Hope this helps. Bias is a nice modelling sim.