Here is my rig:
- Bias Fx (on ipad)
- apogee duet audio interface
generally i use it with the phones. Yesterday i wanted to try it using an frfr speaker (the red sound i have for the kemper).
I plugged a y cable to the apogee out and plug it to the red sound and i heard only the tales of the ping pong delay...
What did i do wrong?
I then decides to plug the red sound to the phone exit of the apogee. In that case the sound was complete. However volume was not very loud and when i tried to turn it up it become really too noisy even with not very saturated rigs.
What is wrong? Do not tell me i have to use this rig only with phones...:)
Thanks for the help.
Sounds like that apogee is summing weird, the iRig HD 2 can do that, if you are using stereo fx it goes whacky
@pipelineaudio Thanks for the reply.
It is strange because when i use the apogee with the laptop and logic it drives both the monitors correctly...
Maybe there are some settings i have to change in Bias? What about the noises in the phone output?
Everything sounds so nice when i play with phones...
I'm trying to find the block diagram in the manual. Is this a Duet or a Duet 2 or what?
@pipelineaudio Thanks. It is a duet for ipad/iPhone/mac...
So the original old duet on the 30 pin? Or a lightning one? This exact model?
Because that one has 4 1/4" outs, should be no problem. I would first try with any time based FX bypassed and see how it sounds from whatever 1/4" out you have specified in bias for the left output
@pipelineaudio it is the one!
However mine has 2 1/4 outputs (one right and one left) and one 1/4 phones out...
Try one of the 1/4" outs on the breakout cable, with all the fx bypassed besides the amplifer and cabinet, and see what it does
@pipelineaudio i will try it in the next few days because i am not at home in these days. Thanks for the help
Finally i had the chance to try the system again. This time i simply plugged one out of the apogee to the frfr speaker (once i have tried the right and then i have tried the left). Both the out work.
Online when i plug them together using the y cable i mentioned at the beginning i only hear the tales of the delay...really weird