MIDI Global and Local?
-
I can find almost zero information on the MIDI system for Bias FX. There seem to be at least three places to set MIDI assignments.
1: in Settings / MIDI control assignments
These seem to be global, and at the same time, do not show settings made by #2 or #3 methods2: By clicking on pedals in the GUI
Not all parameters are able to be accessed here. For instance, wah toggle doesn't seem to be accessible from here nor does any of the splitter/mixer. I cannot find any way to see what is assigned to these MIDI parameters. This appears to save locally3: The Live View pedalboard GUI
This seems to have several MIDI options and I can't tell if its local or global. As far as I can tell, there is an extremely limited number of parameters that can be accessed here, but I could be extremely wrong.Can anyone help me understand the MIDI system on Bias FX?
-
Are the second and third method local?
Can I toggle on/off a pedal assigning an unique and Local CC message per patch using method 2 or 3?
-
I'm trying to figure that out :(
Frustrating, but documentation is seriously no fun, so its understandable
-
@pipelineaudio ok, i'm going to do some tests Tomorrow
-
freaking GOOD news :D
1st method is global
Here you can set a CC list for every pedal/function of bias amp
I recommend to use this only for things you always use in every patch at the same way such as Tuner, tap tempo or patch up/down
I don't recommend use this method in order to toggle on/off pedals...
here's why (read last post):
https://forum.positivegrid.com/topic/134/switching-time-latency-hardware-or-software/222nd method is local
the live view mode allows you to assign a CC message on each pad.
Unfortunately only 4 of them are configurable as you like so this kind of use it's limited.
Anyway I find it very helpful in case in your patch you're using 2 amps and you want to switch between the two: there's the switch CH function that I don't find anywhere else
It is also a good place where you can assign a CC message to toggle on/off volume/whammy/wah pedals or toggle on/off pedaly by category (useful in case you want toggle on/off modulation fx all at once)3rd Method is LOCAL
Awsome. you can assign CC to toglle on/off or control any knob of any pedals you have in your chain
Knobs or Wah pedals can be controlled with an expression of course, but it is also possible to controll'em with a latch or momentary switch..in this case the value goes from 0 to 127 instantly...intresting for some effectswith third method though you can't control the splitter, the amp, the mixer, the IAA and you can't neither toggle on/off volume/wah pedals
We can of course use all of these 3 methods at the same time...
to me it's the turning point I was waiting for! thanks for your inputs!
It's a shame though positive team didn't provide more informations about this!
-
This is awesome! Thank you. I dont know why its so hard to find this sort of info, but it is!
-
I've investigated a little further and I found that Live view is local, but CC midi message you assign to liveView's pad is global
It complicates things a bit... -
Hey!
If you want to use it as a controller for external devices or as a conduit for your computer to control those external devices. It is complicated through the MIDI Jack Source parameter found on the Global page. mozilla firefox pc -
Hello friends!
First, sorry for my bad English. I'm using Google Translate to assemble this text.
I have the MIDI controller BOSS FC-50 and I'm having trouble setting it up with the BIAS FX on the iPad. I can not set the pedals correctly. The setup remains sequential and does not stay as I choose.
EX:
Patch 1 - 1A
Patch 2 - 2A
Patch 3 - 3A
Patch 4 - 4A
Patch 5 - 2A
Patch A/B - 3B
Patch change Bank up - 3C
Patch change Bank Down - 4BI'd like to put the change Bank Patch to actually change Banks, and Patchs 1 to 4 change the patchs 1 *, 2 , 3 * and 4 * ( = Bank Letter)
Can anybody help me?
-
Let me download the fc50 manual and see if I can figure it out
-
@pipelineaudio Thanks!
If you want, here is the link of the manual: https://www.manualslib.com/manual/693259/Boss-Fc-50.html
My setup is:
Ipad - Camera Connection Kit - USB Hub w/ Power Supply
Cable Roland Um One MK2 - BOSS FC-50.My interface that is plugged into the USB Hub is the Focusrite Scarlett 2i2.
-
I think you would map your patches to the new numbers given when you change banks on the pedal. I'm not 100% sure what you are trying to do and its important to remember that MIDI implementation in most modern devices and plugins is pretty anemic
I'll go thru and look as much as I can today.
So it looks like you are using the iOS version right?
-
@pipelineaudio Yes, I'm using Bias FX and Bias Amp 2 on IOS (Ipad), version 11.3.1 (last version).
I'll try to make more tests today. Any news I warn you. Thanks -
Ok, I just programmed a behringer FCB1010 to behave like the Boss FC-50 and everything seemed to work ok.
Remember that PC's on the Boss start at 0, which would be slot 1A. You don't really have to think about banks on the Boss, as when you switch banks, the PC#s just go up sequentially
Make sure to set all of your BiasFX Presets in the same bank inside of BiasFX and put them in the order you want.
-
@pipelineaudio Thanks man!!